Utilization and profit

What Profit Margin Do Engineering Firms Make?

Sam&Sain Co. · Published · Updated · 6 minute read

An engineering firm’s profit margin is its operating profit as a share of revenue. Canada’s engineering firms kept 11.0 cents of every revenue dollar in 2024, and Ontario’s kept 10.4. Salaries took about 42 cents, so where a single firm lands depends heavily on how its people’s time turns into fees.

On this page

Terms Used

  • Operating revenue: everything the firm bills, including subconsultants and expenses it passes on to clients.
  • Net revenue: operating revenue less those pass-through costs.
  • Operating profit: revenue less operating expenses, before interest and income tax.
  • Operating margin: operating profit as a share of revenue. Which revenue, operating or net, has to be said every time.

The Canadian Figures

Statistics Canada surveys engineering firms every year. For 2024, its figures for the industry were:

2024CanadaOntario
Operating revenueC$46.8 billionC$16.9 billion
Operating profit margin11.0%10.4%
Salaries, wages, commissions and benefits, as a share of revenue42.4%43.8%

Source: Statistics Canada, table 21-10-0163-01. The salary share is worked out from the same table: C$19.8 billion of C$46.8 billion for Canada, and C$7.4 billion of C$16.9 billion for Ontario.

How Margins Moved from 2022 To 2024

Operating profit marginCanadaOntario
20229.8%7.9%
202310.8%9.3%
202411.0%10.4%

Source: Statistics Canada, table 21-10-0163-01. Ontario’s firms have closed most of the gap with the national figure in two years, from 1.9 points below it in 2022 to 0.6 points below in 2024. Both figures are industry totals: they describe the sector, and a single firm can sit well above or below them.

Why Another Study Says 16.7%

Deltek’s 2026 study of architecture and engineering firms reports that “Operating profit on net revenue stands at 16.7%” (Deltek, 26 May 2026). It measures profit on net revenue: revenue after subconsultants and pass-through expenses are taken out. Statistics Canada divides by all operating revenue. The same dollars of profit look larger on the smaller base, so the two figures are not in conflict. Deltek’s sample is also different: 896 firms across the US and Canada, against Statistics Canada’s survey of the Canadian industry (Deltek, 12 May 2026).

Converting Between the Two

Example, round numbersAmount
Operating revenue$5,000,000
Less subconsultants and reimbursable expenses$1,000,000
Net revenue$4,000,000
Operating profit$550,000
Margin on operating revenue ($550,000 ÷ $5,000,000)11.0%
Margin on net revenue ($550,000 ÷ $4,000,000)13.75%

In this example, one firm and one year of profit give two margins almost three points apart. The more of its work a firm subcontracts, the wider the gap. When you compare your own firm, use the same base as the figure you compare with.

What Decides a Firm’s Margin

Salaries are the largest cost at an engineering firm: about 42 cents of every revenue dollar in Canada in 2024, against about 11 cents of operating profit (Statistics Canada, table 21-10-0163-01). That ratio explains why small changes in how time turns into fees move the margin so much.

For example, a firm with $5,000,000 of revenue and an 11% margin keeps $550,000. If it writes off 2% of its fees, $100,000, on over-budget fixed fees and unbilled revisions, its profit falls to $450,000: 18% less profit from a 2% leak. The reverse is also true: recovering that 2% takes profit from $450,000 back to $550,000, 22% more, with no new clients and no new hires.

Four levers decide where a firm lands:

  1. Utilization: how much of the paid time goes to billable work. See how to calculate it.
  2. Realization: how much of the billable work’s value is billed and collected. See utilization and realization.
  3. Fees: whether rates and fixed fees cover the firm’s true cost. See overhead rate and setting hourly rates.
  4. Overhead: what the firm spends to run itself, including the salary cost of every hour not charged to a project.

From Project Margins to the Firm’s Margin

The firm’s margin is built project by project. Each project contributes its fee less the salary cost of its hours and any expenses the client doesn’t pay; the firm’s overhead then comes out of the total. So a firm-wide margin can be fine while one kind of work loses money, hidden by another that pays well.

Example, round numbersFeesSalary cost of hoursContribution
Municipal design$2,000,000$650,000$1,350,000
Private development$1,500,000$700,000$800,000
Inspections and reports$500,000$150,000$350,000

In this example, private development brings in three quarters of municipal design’s fees but only about 60% of its contribution. The firm-wide margin hides that. The effective multiplier by kind of work shows it in one figure, and project budget tracking catches it while the projects are still running.

By Discipline

Statistics Canada publishes the margin for engineering services as a whole, not for civil, structural, mechanical or electrical firms separately. Within any discipline, firms of similar size can sit far apart, because the levers above vary from firm to firm. A firm’s own margin by kind of work says more than a discipline average would.

How to Work Out Your Own

  1. From your income statement, take operating profit: revenue less operating expenses, before interest and income tax.
  2. Divide it by operating revenue. That is the figure to compare with Statistics Canada.
  3. Take subconsultants and reimbursable expenses out of revenue, and divide again. That is the figure to compare with studies that use net revenue.
  4. Decide on partners’ pay: if partners take a salary for the work they do, leave it in expenses; if they take only distributions, add a fair salary for their time before you compare, or your margin will look better than it is.
  5. Put the result beside the last two years, the same way.

Common Margin Mistakes

  • Comparing different bases. A margin on net revenue beside one on operating revenue makes the firm look better or worse than it is.
  • Leaving partners’ time out. A firm whose partners take only distributions shows a margin no buyer or bank would accept.
  • Reading one year. One large project can lift or sink a year; three years show the trend.
  • Reading only the total. The margin by kind of work is where the decisions are.

A Checklist for Your Margin

  1. Work out the margin on operating revenue and on net revenue.
  2. Adjust for partners’ pay if needed.
  3. Compare with the last two years, and with the Statistics Canada figure for your province.
  4. Work out the contribution of each kind of work.
  5. Find the weakest of the four levers: utilization, realization, fees or overhead.
  6. Pick one change for that lever, and read the margin again next quarter.

How We Approach This

Our diagnostic starts from these numbers, worked out from your own timesheets, fees and invoices, project type by project type. It answers which clients and project types make the firm money, and every recommendation comes with the numbers behind it.

Questions

What Is the Average Profit Margin for an Engineering Firm?

Statistics Canada measured an operating margin of 11.0% for Canada’s engineering firms in 2024, and 10.4% in Ontario. Deltek’s 2026 study of 896 firms reports 16.7%, measured on net revenue, which leaves out subconsultants and expenses passed through.

Why Do the Two Figures Differ?

They divide by different revenue, and they measure different firms. Statistics Canada uses all operating revenue of the Canadian industry; Deltek uses net revenue, which is smaller, across the 896 US and Canadian firms in its survey. Either difference alone would move the figure.

How Do I Convert a Margin on Revenue to a Margin on Net Revenue?

Divide the same operating profit by net revenue instead. For example, $550,000 of profit on $5,000,000 of revenue is 11.0%; on $4,000,000 of net revenue it is 13.75% (550,000 ÷ 4,000,000).

Are Engineering Firm Margins Rising?

In Statistics Canada’s figures, yes: Canada’s rose from 9.8% in 2022 to 11.0% in 2024, and Ontario’s from 7.9% to 10.4%.

How Profitable Are Civil Engineering Firms?

Statistics Canada publishes the margin for engineering services as a whole, not by discipline. Within any discipline, utilization, realization and overhead decide a firm’s margin more than the discipline does.

Sources

Updates

  • : Rewritten at full length: the margins from 2022 to 2024, converting between operating and net revenue, from project margins to the firm’s, how to work out your own, common mistakes and a checklist; Statistics Canada and Deltek re-read.

Discuss Your Project

Topic

We read every application. If we can help, the first 30-minute video call is free. Or contact us.