Utilization and profit
Net Multiplier and Effective Multiplier, Worked Through
A net multiplier is an engineering firm’s net revenue divided by the salary cost of the hours charged to projects. It is the quickest single test of whether fees cover salaries, overhead and profit.
On this page
Terms Used
- Direct labour: the salary cost of the hours charged to projects, before benefits and overhead.
- Net revenue: total revenue less what the firm passes straight through, such as subconsultants and reimbursable expenses.
- Overhead: everything else the firm spends to run itself, including benefits, rent, software, insurance and the salaries of hours not charged to projects.
- Overhead rate: overhead divided by direct labour. Our article on the overhead rate covers it in full.
What a Multiplier Measures
Engineering firms sell time. A multiplier compares the fees a firm earns with the salary cost of the hours charged to projects: how many dollars of fee each dollar of project salary brings back. Rates and realization move it directly. Overhead does not appear in it, but overhead decides how high it has to be, so partners read the multiplier beside the overhead rate.
There are three multipliers worth knowing, and they answer different questions: the net multiplier for the firm’s year, the effective multiplier for one project, and the billing multiplier for setting rates.
The Net Multiplier Formula
The net multiplier is net revenue divided by direct labour, over a year or a quarter.
Net multiplier = net revenue ÷ direct labour
| Example, round numbers | One year |
|---|---|
| Total revenue | $3,600,000 |
| Less subconsultants and reimbursable expenses | $600,000 |
| Net revenue | $3,000,000 |
| Direct labour (salary cost of project hours) | $1,000,000 |
| Net multiplier | 3.0 |
In this example, every dollar of project salary brought back three dollars of fees. Taking out the pass-through costs matters: a firm that subcontracts a large share of one year’s work would otherwise see its multiplier jump with nothing changed in its own work.
Effective Multiplier, for a Project
Effective multiplier = project fee ÷ salary cost of the hours it used
For example, take a $60,000 fixed-fee project. If the team’s hours on it cost $20,000 in salary, the effective multiplier is 3.0. If the project runs over and the hours cost $30,000, the multiplier falls to 2.0 on the same fee.
Calculated as each project closes, the effective multiplier shows which kinds of work pay and which only keep people busy:
| Example, round numbers | Fee | Salary cost of hours | Effective multiplier |
|---|---|---|---|
| Municipal road design | $80,000 | $25,000 | 3.2 |
| Private site plan | $45,000 | $20,000 | 2.25 |
| Building condition report | $18,000 | $5,000 | 3.6 |
In this example, the site plan earns well below the other two on each salary dollar. The question for the partners is why: a fee set too low, scope that grew, or a client who asks for more than the contract covers. Our article on project budget tracking shows how to catch that during the project rather than at closeout.
Billing Multiplier, for Setting Rates
The billing multiplier is the one you choose in advance: the factor that turns a person’s salary cost per hour into their hourly rate. For example, an engineer whose salary costs $50 an hour, billed at a multiplier of 3.0, has a rate of $150. Our article on engineering hourly rates covers how to set them.
The net multiplier is what the firm actually achieves once write-offs, over-budget projects and unbilled hours are counted. The gap between the two is a good measure of leakage.
How the Three Connect
The billing multiplier is the plan, the effective multiplier is each project’s result, and the net multiplier is the year’s total. What sits between the plan and the result is realization: the share of the hours’ value that became fees.
Net multiplier ≈ billing multiplier × realization
For example, a firm that sets its rates at 3.0 times salary cost and realizes 85% of the value achieves about 3.0 × 0.85 = 2.55. It is approximate because pass-through costs, expenses and timing move it a little, but the lesson holds: a firm with good rates and poor realization ends the year with a poor multiplier.
What Multiplier a Firm Needs
The minimum comes from the overhead rate: overhead costs divided by direct labour. For example, a firm with an overhead rate of 160% spends $1.60 to run itself for every dollar of project salary, so it needs $2.60 back to break even.
Break-even multiplier = 1 + overhead rate
| Example: overhead rate | Break-even multiplier | Profit at a 3.0 multiplier, per $1 of direct labour |
|---|---|---|
| 140% | 2.40 | $0.60 |
| 160% | 2.60 | $0.40 |
| 180% | 2.80 | $0.20 |
The same 3.0 multiplier is comfortable at one firm and thin at another. That is why a multiplier only means something beside the firm’s own overhead.
The Multiplier for a Target Profit
To aim for a profit rather than break even, divide the break-even multiplier by one minus the profit margin you want on net revenue.
Target multiplier = (1 + overhead rate) ÷ (1 − target profit margin)
For example, a firm with an overhead rate of 160% that wants a 15% profit on net revenue needs 2.60 ÷ 0.85 = 3.06. At a 10% margin it needs 2.60 ÷ 0.90 = 2.89. This is the number to compare with the net multiplier at the end of each quarter.
A Canadian Reference Point
No public survey reports net multipliers for Canadian engineering firms. Statistics Canada does publish a related ratio: in 2024, salaries, wages, commissions and benefits came to C$19.8 billion of C$46.8 billion in operating revenue for engineering services in Canada, or 42% (Statistics Canada, table 21-10-0163-01). That works out to about 2.4 dollars of revenue for each dollar of total pay.
It is not a multiplier. Its revenue includes pass-through costs, and its pay includes benefits and every hour not charged to a project. It is useful as a rough check: a firm whose revenue per dollar of total pay sits well below it has a question to answer about its fees or its hours.
What Moves the Multiplier
- Realization. Hours written off, or fixed fees exceeded, lower the fees each salary dollar brings back.
- Rates. Rates that stay flat while salaries rise shrink the multiplier a little every year.
- Staffing mix. Senior people doing work a junior could do lowers the multiplier on that work, because the fee stays the same while the salary cost of the hours rises.
- The kind of work. Some project types carry fees that fit them and others don’t; the effective multiplier by project type shows which.
What Moves the Break-Even Point
- Utilization. A firm can hold the same multiplier while its utilization changes. What changes is the break-even point: more billable hours move salary out of overhead and into direct labour, which lowers the overhead rate and so the multiplier the firm needs.
- Overhead costs. Rent, software, insurance and the salaries of people who do not bill all raise the overhead rate, and with it the break-even multiplier.
How to Raise the Multiplier
- Review rates every year, against salary changes, so the billing multiplier doesn’t erode quietly.
- Track hours against fee every week on fixed-fee projects, so overruns are raised as change orders while the client still remembers asking.
- Staff each task at the right level, and give senior people the review rather than the drafting.
- Review each project at closeout: its effective multiplier, and one reason it landed where it did.
- Price the next project from the last one of the same type, not from the estimate that was missed.
A Note on Definitions
Firms and benchmarking studies do not all define direct labour and net revenue the same way. Some include benefits in direct labour; some keep certain expenses in revenue. Choose definitions that match your accounting, write them down, and keep them, so this year’s multiplier compares with last year’s. When you compare with a published benchmark, read its definitions first.
Common Multiplier Mistakes
- Using total revenue. Pass-through costs inflate the figure and make it swing with subcontracting.
- Mixing benefits in and out. Including benefits in direct labour one year and not the next moves the multiplier with nothing real behind it.
- Reading only the firm’s total. A healthy net multiplier can hide one kind of work that loses money.
- Comparing with another firm’s figure. Without its overhead rate and definitions, the comparison says little.
A Checklist for the Multiplier
- Write down the firm’s definitions of direct labour and net revenue.
- Calculate the overhead rate and the break-even multiplier.
- Set the target multiplier for the profit margin the partners want.
- Calculate the net multiplier each quarter and compare it with the target.
- Calculate the effective multiplier for each project at closeout.
- Group the effective multipliers by kind of work and by client once a year.
- Review rates against salaries once a year.
How We Approach This
Our growth work includes a fee and margin review, project type by project type, worked out from your own timesheets, fees and invoices. It answers which clients and project types make the firm money, and whether this work should be fixed fee or hourly. Every recommendation comes with the numbers behind it.
Questions
What Is a Net Multiplier?
Net revenue divided by direct labour, the salary cost of the hours charged to projects. Net revenue leaves out what the firm passes through to subconsultants and expenses.
How Do You Calculate an Effective Multiplier?
Divide a project’s fee by the salary cost of the hours spent on it. For example, a $60,000 fee that used $20,000 of salary cost has an effective multiplier of 3.0 (60,000 ÷ 20,000).
What Multiplier Does a Firm Need?
Enough to cover overhead and leave a profit. For example, a firm whose overhead rate is 160% breaks even at a multiplier of 2.6 (1 + 1.6); for a 15% profit on net revenue it needs 2.6 ÷ 0.85, about 3.06.
What Is the Difference Between the Net Multiplier and the Billing Multiplier?
The billing multiplier is the one you set when you turn a salary into an hourly rate. The net multiplier is what you actually achieved once the year’s fees are in. Realization is most of the gap between them.
Should Benefits Be Included in Direct Labour?
Either way works if the firm keeps to one rule. Benchmarks differ on it, so read a benchmark’s definitions before comparing with it.
Sources
Updates
- : Rewritten at full length: worked examples for the firm and for projects, how the three multipliers connect through realization, the multiplier for a target profit, a Canadian reference point from Statistics Canada, how to raise it, common mistakes and a checklist. A calculator added, starting on the worked example.