Growing the firm
Starting an Engineering Firm in Ontario: The Certificate of Authorization and the First Year
In Ontario, a business that offers professional engineering to the public needs a Certificate of Authorization from Professional Engineers Ontario. That comes before the first client, with the firm’s structure, insurance and GST/HST position, and the business decisions follow from it.
What follows summarizes Professional Engineers Ontario’s own guide, Certificate of Authorization Requirements: An Information Guide (April 2025), and the Ontario and federal pages linked below. It is general information, not legal or tax advice: for an application, read PEO’s current forms and the Act itself, and ask your lawyer and accountant about your own case.
On this page
Terms Used
- Licence: what PEO issues to an individual to practise professional engineering.
- Certificate of Authorization (C of A): what PEO issues to an individual or a business to offer and provide engineering services to the public.
- Person who takes responsibility: the licence holder a C of A applicant names to assume professional responsibility for the services it provides.
- Disclosure notice: PEO’s form a C of A holder without the minimum insurance gives each client, who signs it back.
- Small supplier: a business under the GST/HST registration threshold, which does not have to register.
The Certificate of Authorization
Section 12(2) of the Professional Engineers Act, as quoted in PEO’s guide: “No person shall offer to the public or engage in the business of providing to the public services that are within the practice of professional engineering except under and in accordance with a certificate of authorization.” The certificate, the C of A, is issued by PEO to individuals and businesses. It is separate from the licence an individual engineer holds: a licensed engineer opening a firm needs both.
PEO’s guide gives examples of when a C of A is required:
- A person or business that advertises or promotes itself as offering professional engineering services.
- Engineering provided through the sale of a custom-designed or original product.
- An engineer who works for an employer but also offers engineering directly to the public, part-time or as a volunteer. The guide adds that such an engineer must tell their employer and should give the client a written statement of their status as an employee.
Employee or Contractor: Who Needs One
A firm that takes on engineers under contract, or an engineer who goes out on their own, needs to know which side of the line each arrangement falls on. PEO’s guide lists the signs on each side:
| Likely an employee: no C of A needed for this work | Likely a contract for service: a C of A likely needed |
|---|---|
| Works only for that firm | Free to work for more than one firm |
| Paid a salary or wage, with benefits such as vacation pay | Invoices the firm for time; not paid if no services are performed; no vacation pay or bonuses |
| Set work hours; office and equipment provided | Not restricted as to hours of work |
| Expenses reimbursed | The contract shows an independent relationship, or the time is bought from an agency |
| Covered by the firm’s professional liability insurance | Not covered by the firm’s insurance |
PEO’s guide sums it up: an engineer offering or providing engineering services “to anyone but yourself or your employer” requires a C of A.
The Requirements
A Person Who Takes Responsibility
Under section 47 of Regulation 941, the applicant must name at least one person in the firm to take professional responsibility for the services it provides: a professional engineer, a temporary licence holder, or an eligible limited licence holder or licensed engineering technologist. PEO’s guide sets out which limited licence holders qualify, depending on when their licence was applied for.
Professional Liability Insurance
Section 74 of Regulation 941, quoted in full in PEO’s guide, sets the minimum policy for C of A holders. Its main terms:
- A limit of at least $250,000 for each claim, and either $500,000 a year for all claims or an automatic reinstatement of the limit (PEO, April 2025).
- A deductible no greater than $5,000 or 5% of the fees billed in the previous twelve months, whichever is greater; PEO reads those fees as gross fees from engineering services only (PEO).
- Coverage for errors, omissions and negligent acts in all the engineering the firm offers.
- No cancellation or change that breaks the rules without 45 days’ written notice, or 15 days for unpaid premiums.
- An insurer with at least $20,000,000 of capital and surplus, or Lloyd’s underwriters (PEO).
A holder may instead go without that insurance if, before agreeing to provide services, it gives each client PEO’s disclosure notice saying it is not insured to the minimums and receives the client’s written authority. The guide describes that option as originally “a transitory device” and warns that as a firm and its clients grow, it has much more to lose if a claim is made. The regulation lists three other exceptions, such as other insurance that covers substantially all claims on terms not materially less than the minimums. The firm certifies which option applies at every renewal.
Renewal and Changes
A C of A expires on the last day of the month, twelve months after it is issued. PEO sends a renewal package 60 to 90 days before. Without a renewal by the expiry date, PEO issues a default notice, and the holder has 60 days from the expiry date in that notice to apply for renewal, with payment. After that, PEO cancels the C of A, the firm may no longer provide engineering services to the public, and a new application is needed; PEO’s guide says the C of A is “no longer renewable after the 60th day after the expiry date”. Changes to the information on the application or renewal, including the people listed, must be reported within 30 days (section 50.1 of Regulation 941).
Choose the Structure Before You Apply
The legal form of the business matters to the C of A. PEO’s guide says it will generally cancel a C of A if the holder’s name changes and the government issues a new corporate registration number; the new entity then applies again. A name change that keeps the same registration number can be amended for a fee. So an engineer who starts as a sole proprietor and incorporates a year later should expect a new application, and the question of a corporation, a partnership or a sole proprietorship is worth settling with an accountant and a lawyer before the first one.
Ontario businesses register, incorporate and file through the Ontario Business Registry. Its page says changes must be reported “within 15 days”, and that corporations must file an annual return each year “within 6 months of their fiscal year-end” (Government of Ontario, Ontario Business Registry).
GST/HST: When a New Firm Registers
The Canada Revenue Agency’s rule for most businesses: a business that does not exceed the $30,000 threshold over four consecutive calendar quarters is a small supplier and does not have to register, though it may register voluntarily; a business that exceeds $30,000 in a single calendar quarter must register and charge GST/HST on the supply that took it over. A business that exceeds $30,000 over the previous four (or fewer) consecutive calendar quarters, but not in a single quarter, stops being a small supplier “at the end of the month following the quarter” in which it exceeds $30,000, and charges GST/HST from its effective date of registration, no later than the day of its first supply after that (Canada Revenue Agency, when to register). The $30,000 counts revenues before expenses from worldwide taxable supplies, and associates’ revenues where the CRA’s associated-person rules apply, so the total is not simply the firm’s own invoices. A new firm with one sizeable project can cross the line in its first quarter; check where it stands each quarter, with an accountant. Records start then too: the CRA generally asks for six years from the end of the last tax year they relate to (Canada Revenue Agency, keeping records).
Advertising
Section 75 of Regulation 941 allows licence and C of A holders to advertise only in a professional and dignified manner, factually and without exaggeration, without criticizing another engineer or firm, and without using the professional seal. PEO’s guide adds that advertising may be considered inappropriate if it claims more responsibility for a project than is fact, leaves out the associated firms that worked on it, exaggerates the project’s performance, or shows parts of a project the firm wasn’t responsible for without a disclaimer. A company may not advertise as “Engineers” without a C of A, and advertising as “Consulting Engineers” needs PEO Council’s prior authorization and a designated consulting engineer. Our article on marketing for engineering firms works within those rules.
Without One
PEO’s guide says offering engineering services without a C of A contravenes the Act, with fines of up to $25,000 for a first offence and up to $50,000 for later ones (PEO, April 2025), and that licence holders who do so may also face a complaint through PEO’s discipline process.
A First-Year Calendar
| When | What | Where it comes from |
|---|---|---|
| Before the first client | Structure chosen; business registered or incorporated; C of A granted; insurance in place or disclosure notices ready | PEO’s guide; the Ontario Business Registry |
| Each quarter | Taxable revenues against the small supplier threshold, in the single quarter and over the last four; register when either test is passed | CRA, when to register |
| Within 30 days of any change | PEO told of changes to the application, including the people listed | Regulation 941, section 50.1 |
| Within 15 days of any change | The Ontario Business Registry updated | Ontario Business Registry |
| Within 6 months of year-end | A corporation’s annual return filed | Ontario Business Registry |
| Twelve months after issue | C of A renewed, with the insurance certified | PEO’s guide |
The Business Decisions That Follow
With the C of A in hand, the first year is mostly business:
- Rates. Built from your costs, not just the market. See setting hourly rates.
- Proposals and contracts. A standard fee proposal with scope, assumptions, exclusions and billing terms. See what goes in a fee proposal.
- Time and billing. A timesheet and invoicing routine from the first project, so every later number is reliable. See timesheets.
- Proof. A project sheet for every job, written when it closes. See statement of qualifications.
- A plan. Who the firm is for and how it will win work, on two pages. See a strategic plan.
Common Mistakes
- Contracting without a C of A. An engineer who invoices a firm for time, outside its insurance, is likely providing services to the public.
- Incorporating after applying. A new corporate registration number generally means a new C of A.
- Missing the 30 days. A new partner, a departed engineer or a change of address is a change PEO must hear about.
- Letting the renewal lapse. Sixty days after the expiry date in PEO’s default notice, the C of A is cancelled.
- Advertising loosely. “Consulting Engineers”, a seal in an advertisement, or a project shown without saying who did which part.
How We Approach This
We consult to engineering firms on how the business runs. The licensing and the engineering are PEO’s and your engineers’; our growth work covers the fees, the pursuits and where the firm grows next.
Questions
Do I Need a Certificate of Authorization to Start an Engineering Firm in Ontario?
Yes, if the firm offers or provides professional engineering services to the public. PEO’s guide quotes section 12(2) of the Professional Engineers Act, and the requirement applies to sole proprietors, partnerships and corporations.
What Are the Requirements for a Certificate of Authorization?
Under section 47 of Regulation 941, the applicant names at least one person to take professional responsibility for the services, such as a professional engineer. The holder must also carry professional liability insurance at the minimums in section 74, or use the disclosure option.
Do I Need Insurance if I Work Alone?
The same rules apply to a sole proprietor: carry the minimum policy, or give each client PEO’s disclosure notice and receive their written authority before agreeing to provide services.
How Long Does a Certificate of Authorization Last?
It expires on the last day of the month, twelve months after it is issued, and is renewed each year with the insurance certified. After a missed renewal, PEO issues a default notice and allows 60 days from the expiry date in it before cancelling.
Can My Firm Advertise as “Consulting Engineers”?
Only with PEO Council’s prior authorization and a designated consulting engineer on staff, according to PEO’s guide.
What Happens Without One?
PEO’s guide says offering engineering services without a Certificate of Authorization can lead to fines of up to $25,000 for a first offence and $50,000 for later ones.
Sources
- Professional Engineers Ontario, Certificate of Authorization Requirements: An Information Guide, April 2025, read
- Government of Ontario, Ontario Business Registry, updated 28 September 2026, read
- Canada Revenue Agency, When to register for and start charging the GST/HST, read
- Canada Revenue Agency, Where to keep your records, for how long and how to request permission to destroy them early, read
Updates
- : Rewritten at full length: PEO’s employee and contractor signs, all of section 74’s insurance terms, renewal and cancellation, choosing the structure before applying, the Ontario Business Registry, GST/HST registration, advertising, a first-year calendar and common mistakes; PEO’s guide re-read.