Growing the firm

Marketing for Engineering Firms: What Actually Brings in the Work

Sam&Sain Co. · Published · Updated · 7 minute read

Marketing for an engineering firm carries its reputation to clients who haven’t worked with it yet: a clear position, proof from finished projects, and the places those clients look. It is measured in shortlists, wins and fees.

On this page

Terms Used

  • Position: one or two sentences saying who the firm is for and what it does better than the other firms those clients could call.
  • Proof: finished projects described plainly, with the firm’s exact role: project sheets, photographs, short videos, case studies.
  • Lead source: where an opportunity first came from: a repeat client, a referral, a public RFP, the website, an event.
  • Commercial electronic message: in Canada’s anti-spam law, an email or other electronic message that encourages taking part in a commercial activity.

Where Engineering Work Comes From

An engineering firm’s work comes from two groups. The first already knows it: repeat clients, architects, contractors and other consultants who refer work, and former colleagues. The second doesn’t: a public owner issuing an RFP, a developer new to the city, a sector the firm hasn’t worked in. Marketing for an engineering firm is everything that makes the firm known, and chosen, by the second group as easily as by the first, and that keeps the first group from forgetting it.

1. Decide What the Firm Is Known For

Write down, in one or two sentences, who the firm is for and what it does better than the other firms those clients could call. “Structural engineering for renovations of occupied commercial buildings” is a position. “Full-service engineering for all project types” is a list. Three tests show whether a position is real:

  1. A client could repeat it. After one meeting, they could tell a colleague what the firm is for.
  2. It leaves work out. A position that fits every project helps choose none.
  3. Proof exists. The firm has finished projects that show it, or can name the first ones it will win.

A clear position makes every later step easier: the projects to show, the people to meet, the proposals to write, the RFPs to pass on. Our article on growing a small firm shows how to find it in the firm’s own numbers: the clients and project types that already pay best.

2. Turn Every Project into Proof

Proof is written when a project closes, while the photographs and details are at hand. A project sheet holds the same fields every time:

FieldWhat it says
TitleWhat the project was and where, in plain words
The client’s problemWhy the project existed, in the client’s terms
The firm’s roleExactly what the firm did, and which firms did the rest
What was doneThe approach, in a few sentences a non-engineer can follow
The resultWhat changed for the client, only what can be shown
Photographs, video, referenceWith the client’s permission

Short videos and photographs of completed projects, with the client’s permission, often explain more than a page: a minute of video of a finished space shows what the drawings made possible. Case studies suit the best projects: the story of the problem and how it was solved, told plainly. Describe the firm’s role exactly. In Ontario, PEO’s guide warns against claiming more responsibility for a project than is fact, or showing parts of a project the firm was not responsible for without saying so (PEO, April 2025).

3. Put the Proof Where Clients Look

  • Proposals and qualifications. The place most engineering work is won or lost. See statement of qualifications and writing an RFP response that scores.
  • The website. What the firm does, for whom, and its projects. See what an engineering firm’s website needs.
  • LinkedIn. The firm’s page, and engineers who share their own projects and lessons. Clients hire people, so the people’s own posts matter as much as the page.
  • Associations and events. Talks and articles where your clients meet: building owners’ and managers’ groups, municipal associations, architects’ and contractors’ events.

The same project sheet serves all four. Written once, at closeout, it becomes a proposal page, a website project, a LinkedIn post and the example in a talk.

4. Keep in Touch with the People Who Already Know You

A simple list of past clients and referrers, and a habit of contacting each a few times a year with something useful (a finished project, a change in regulations that affects them), keeps the firm in mind when the next project comes up. It costs little more than the time to write.

Email to that list has rules. Canada’s anti-spam law prohibits sending a commercial electronic message unless the person “has consented to receiving it, whether the consent is express or implied”, and the message identifies the sender and offers a way to unsubscribe (S.C. 2010, c. 23, section 6). Implied consent from an existing business relationship rests on a purchase or a business opportunity accepted “within the two-year period immediately before the day on which the message was sent”, and an unsubscribe must take effect “no later than 10 business days” after it is sent (sections 10 and 11). So keep, beside each name, how and when they agreed to hear from you, and ask for express consent from people the firm hasn’t worked with recently, in person, by phone or on a paper form. Under the act, an email that asks for consent to send commercial messages “is also considered to be a commercial electronic message” (section 1(3)), so it needs consent or an exemption of its own. This is general information, not legal advice.

5. Measure It in Work Won

Likes and followers are not the measure. Track shortlists reached, proposals won, and fees, by where each lead came from. Over a year, that shows which activities bring in work and which only feel busy. See proposal win rate.

Example, round numbers: one yearLeadsProposalsWonFees won
Repeat clients14128$640,000
Referrals1084$310,000
Public RFPs30163$420,000
Website and LinkedIn1241$45,000

In this example, repeat clients and referrals bring in most of the fees from the fewest proposals, public RFPs bring large fees at a low win rate, and the website brings leads that rarely become work. The answer isn’t to stop any of them: it is to read why the website’s leads didn’t fit, and to be more selective on RFPs with a go/no-go sheet.

Within the Rules

In Ontario, licence and C of A holders may advertise only in a professional and dignified manner, factually and without exaggeration, without criticizing another engineer, and without using the seal (Regulation 941, section 75, quoted in PEO’s guide). A company may not advertise as “Engineers” without a C of A, and “Consulting Engineers” needs PEO Council’s authorization. Plain, factual marketing with real projects fits those rules and tends to suit engineering clients anyway. Our article on starting a firm in Ontario sets out the advertising rules in full.

A Year of Marketing, as a Checklist

  1. Write the position in two sentences, and test it on three clients.
  2. Write a project sheet for every project as it closes.
  3. Update the website and the statement of qualifications from the sheets.
  4. Keep the contact list, with how and when each person agreed to hear from you.
  5. Contact each past client and referrer a few times a year with something useful.
  6. Choose two events or associations where your clients meet, and show up at both.
  7. Record every lead’s source, and read the table once a year.

How We Approach This

Our marketing work covers positioning, proposals and qualifications, the website and LinkedIn.

Questions

How Do Engineering Firms Get Clients?

Through repeat clients, referrals from architects, contractors and other consultants, and public RFPs. Marketing makes the firm known to clients who haven’t worked with it yet, with a clear position and proof from finished projects.

What Are Good Marketing Ideas for an Engineering Firm?

Project sheets and short videos of finished projects, talks at the associations where clients meet, engineers sharing their own projects on LinkedIn, and keeping in touch with past clients a few times a year.

Should an Engineering Firm Advertise?

It may, in Ontario within section 75 of Regulation 941: professional, factual, without criticizing other engineers and without the seal. Whether paid advertising pays is for the firm’s own lead-source records to show.

Can We Email a Newsletter to Past Clients?

With consent. Canada’s anti-spam law accepts implied consent from a purchase or accepted business opportunity within the two years before the message, requires the sender to be identified and an unsubscribe in every message, and gives 10 business days to act on an unsubscribe.

How Much Should an Engineering Firm Spend on Marketing?

No reliable public figure exists for Ontario engineering firms. Set the budget from what the firm’s own table of leads, wins and fees by source shows pays.

Sources

Updates

  • : Rewritten at full length: three tests of a position, the project sheet’s fields, keeping in touch within Canada’s anti-spam law (sections 6, 10 and 11 read), a lead-source table (worked example), the advertising rules and a year’s checklist; PEO’s guide re-read.

Discuss Your Project

Topic

We read every application. If we can help, the first 30-minute video call is free. Or contact us.